Connecting 4 SATA 7.2K LFF HDD on a Cisco UCS C220 M4L
Dear Cisco Community,
i've tried to study the Cisco C220 M4 datasheet but I'm still not sure if it's possible to install 4 SATA 7.2K LFF HDD on a Cisco UCS C220 M4L without installing any Raid/HBA controller, using the integrated Intel Wellsburg PCH controller.
I want to use this server for ZFS purposes, so it's unnecessary for me have a server with a raid controller and besides this, for this kind of HDD i don't need SAS performance.
Here the Block Diagram, for the Cisco C220 M4 Server, and for what regards the M4L (LFF) seems here that the cables can only be attached to the Raid Card
Can someone give me an advice, if I can buy the server so configured
Mega raid option does not appear when the server comes to the bios screen, I see the Megar aid PCI card when I look at the bios but I can not do in the configuration because all setting is disable. There are three from this server and they all have t...
•This field guide is meant to be used by customers for cleaning up an existing HyperFlex Edge deployment for the purposes of reinstalling.
•The procedures in this guide are DESTRUCTIVE. Make sure all VMs and data are backed up before proceedi...
i have installed two numbers of cisco VIC 1385 card on UCS C240M5 server but in CIMC VIC adapter section only one card is listed. i have installed the cards in slot number 4 & 5. in VIC adapter section only slot 5 is showing. In PCI adapter i could se...