Re: Create Service Profiles - don't want them to associate automatically
Check and see if you have a policy that is placing blades into a server pool and what those qualifiers are. I believe that the updating template you are using is referencing a server pool and by policy unassigned blades are being attached to unassociated service profiles.
If that is the case you can alter which blades are being placed into the pool by modifying the policy or removing it from the updating template.
I'd be interested to hear back if this was the case.
Cisco UCS Platform Emulator, Release 4.0(4ePE1)
CONFIGURATION IMPORT NOTE: Importing configuration backups (All, System, or Logical) taken from the UCS Platform Emulator (UCSPE) to physical UCS Manager domains is not recommended or supported...
Many users of technology in today's workforce are considered "remote workers". We have laptops, tablets, smartphones, etc. that allows us to stay connected if we choose ~96.259% of the time (personal "guestimate" percentage). When you get down to ...
Mega raid option does not appear when the server comes to the bios screen, I see the Megar aid PCI card when I look at the bios but I can not do in the configuration because all setting is disable. There are three from this server and they all have t...
•Field guides are meant to be used by customers for cleaning up an existing HyperFlex Edge or HyperFlex DC FI deployments for the purposes of reinstalling.
•The procedures in these guides are DESTRUCTIVE. Make sure all VMs and data...
i have installed two numbers of cisco VIC 1385 card on UCS C240M5 server but in CIMC VIC adapter section only one card is listed. i have installed the cards in slot number 4 & 5. in VIC adapter section only slot 5 is showing. In PCI adapter i could se...