cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco Community Designated VIP Class of 2020

115
Views
0
Helpful
3
Replies
Highlighted
Beginner

disable embedder raid megasr in cisco ucs c22 m3.

i don't know how to disable this embedded raid. please help me.

 

onboard.pngpch not detect.png

3 REPLIES 3
Cisco Employee

Re: disable embedder raid megasr in cisco ucs c22 m3.

Hi ,

How to disable #

Disabling the Embedded RAID Controller in the BIOS (UCS C220 servers)
Step 1 Boot the server and press  F2 when prompted to enter the BIOS Setup utility.
Step 2 Select the Advanced tab, then  South Bridge .
Step 3 Set Onboard SCU Storage Support to  Disabled.
Step 4 Press F10 to save your changes and exit the utility.

If the changes are not getting saved or reverting , try to update the firmware of the CIMC and check the behaviour.

 

 

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
Beginner

Re: disable embedder raid megasr in cisco ucs c22 m3.

If i disable the embedded raid.  Can i install OS to the server.  I don't have hw raid. 

Cisco Employee

Re: disable embedder raid megasr in cisco ucs c22 m3.

You need either the embedded raid/ Sw raid or Hw raid to manage the drive in JBOD / RAID / VD (virtual drive)

 

https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-c-series-rack-servers/200509-C-Series-Enable-JBOD-on-Cisco-12G-SAS.html

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
CreatePlease to create content
Content for Community-Ad
FusionCharts will render here