Got it working in the lab, here are notes. Can say "It Works"
Microsoft Storage Server with dual port 10G card Direct Attached
Used port 20 on each FI
Under the Appliances tab created a VLAN with ID of 2000
Bound that to each Storage Port
Created a VLAN with same ID 2000, under VLANs tab under LAN tab. Found that if the “names” are the same it does not work, so they must be different, but ID has to be.
This is kind of far out since most would think the two VLAN’s would not see each other. Example you can create a VLAN with some ID on each FI, and they will not see each other. But you can create a global one under LAN/VLANs tab both FI’s would see it.
Create a vNIC template and bing to the VLAN created that matches the ID of desired Appliance VLAN. Fine that Native is selected by default.
Cisco UCS Platform Emulator, Release 4.0(4ePE1)
CONFIGURATION IMPORT NOTE: Importing configuration backups (All, System, or Logical) taken from the UCS Platform Emulator (UCSPE) to physical UCS Manager domains is not recommended or supported...
Many users of technology in today's workforce are considered "remote workers". We have laptops, tablets, smartphones, etc. that allows us to stay connected if we choose ~96.259% of the time (personal "guestimate" percentage). When you get down to ...
Mega raid option does not appear when the server comes to the bios screen, I see the Megar aid PCI card when I look at the bios but I can not do in the configuration because all setting is disable. There are three from this server and they all have t...
•Field guides are meant to be used by customers for cleaning up an existing HyperFlex Edge or HyperFlex DC FI deployments for the purposes of reinstalling.
•The procedures in these guides are DESTRUCTIVE. Make sure all VMs and data...
i have installed two numbers of cisco VIC 1385 card on UCS C240M5 server but in CIMC VIC adapter section only one card is listed. i have installed the cards in slot number 4 & 5. in VIC adapter section only slot 5 is showing. In PCI adapter i could se...