Error: Failed to parse path in URl (Cisco UCS 6100 Series Fabric Interconnect)

[parakiteiz]

I have to shut down parts of my network due to an electrical outage this weekend. I have a Cisco UCS 6100 Server Fabric Interconnect. I am trying to backup the configuration. This is the command I am using create backup tftp://*.24.1.88 full-state enabled.  The error I receive is Error: failed to parse URI.  Which I believe URI means URL.

[Manuel Velasco]

Hi Parakiteiz,

Looks like the format is incorrect and you have an extra 't' on the tftp command you provided.  Please take a look at the link below for configuration assistance.

Creating backup operaiton.

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/1-1-1/b_CLI_Config_Guide_1_1_1/CLI_Config_Guide_1_1_1_chapter38.html#task_4704260519853629974

Please let me know if this help

[walter baziuk]

i have the same issue

to get the license upload the process is

scope license

download license  ftp://<host>/<path>

when i do that i get this error after entering the ftp password

"failed to parse host in URI"