04-08-2021 01:22 AM - edited 04-08-2021 01:26 AM
Dear All,
We are facing some issues with Hyperflex Cluster creation, below here are details
1) Download and activated the required firmware bundle.
2) Reset Fabric interconnect
3) Tried with different hyperflex installer like 4.0 a and 4.0 c
4) FI cluster are UP and NTP server reachable.
still problem exist ....
your prompt support will be appriciated.
Regars
Solved! Go to Solution.
04-08-2021 03:56 AM
You are missing the Blade (B) series bundle packages in the UCSM. It looks like you have the 4.04 "i" version for UCSM and the C series, but have the 4.04 "L" version for the B/blades.
What ever version you are choosing in the installer drop down, make sure that both B and C series versions are present on the UCSM.
Kirk...
04-13-2021 02:36 AM
Dear Kirk J,
Good Day,
Thanks for your prompt support, Zooming in exactly shows the installed Package was 4.0 'l' ........updating with required 4.0 'i' solved the problem.
Regards
Nuhu
04-08-2021 03:56 AM
You are missing the Blade (B) series bundle packages in the UCSM. It looks like you have the 4.04 "i" version for UCSM and the C series, but have the 4.04 "L" version for the B/blades.
What ever version you are choosing in the installer drop down, make sure that both B and C series versions are present on the UCSM.
Kirk...
04-13-2021 02:36 AM
Dear Kirk J,
Good Day,
Thanks for your prompt support, Zooming in exactly shows the installed Package was 4.0 'l' ........updating with required 4.0 'i' solved the problem.
Regards
Nuhu
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide