I open a case with VMware and they performed the following steps:
Rebuild the VirtualCenter agent configuration file on the ESXi host:
Caution: This step removes all host and virtual machine historical statistics counters. If the VMware ESX host is running virtual machines that started up in an EVC enabled environment, you may not be able to add the host back without shutting down the virtual machines first.
a. Right-click the ESX host in vCenter Server and click Disconnect.
b. Remove the disconnected ESX host from vCenter Server.
2. From ESXi host: a. Select Toubleshooting b. Select Restart Management Agents and press Enter
3. In vCenter
a. Add the disconnected ESX host to the vCenter Server inventory.
Was trying to get neworking to work on a new Ubuntu install on a UCS server. I did a "shutdown -r" and rebooted the server. Now it seems to be stuck in the Aptio setup utility. I either choose "save and exit" or exit without saving changes and I am brough...
Just wonder we recently try to add 2 M200 with firmware 4.1.1b, our UCS manager version is 4.0.2d, we got error said cannot donwgrade. I know we can update ucs manager from 4.0 to 4.1, bur wonder we can downgrade
OpenStack Neutron project offers pluggable framework means you can extend the capability of Neutron by orchestrating the Neutron functions to your upstream networking gears. For example, if you have provisioned a VLAN tagged Neutron network in Op...
https://soundcloud.com/user-327105904/s7e25-from-the-office-to-anywhere-empowering-secure-remote-work-with-cisco-vdi-solutions As organizations have had to rapidly respond and transition in the face of swift change, Cisco VDI solutions have enabled ...