Hi,
I am going to migrate our FI and MDS with the new units. i need some of your inputs please. Below is the current devices i have in out infra.
Current Devices.
2 x Fibre Interconnect - Cisco UCS FI 6248UP doing HA
2 x MDS SAN Switch - Cisco MDS 9148 doing HA
UCS CHASSIS
Chassis 1 - CISCO UCS 5108
Chassis 2 - CISCO UCS 5108
chassis 3 - CISCO UCS 5108 AC2 Chassis
Chassis 4 - CISCO UCS 5108 AC2 Chassis
Chassis 5 - CISCO UCS 5108 AC2 Chassis
BLADES - We have 33 Blades with combination of below models.
CISCO UCS B200 M3
CISCO UCS B200 M4
SAN STORAGE
NIMBLE CS300
NIMBLE CS5000
NETAPP EF550
TAPE LIBRARY - Quantum Scalar i80
We are planning to replace the FI and MDS with below specs.
2 x New Fibre Interconnect - CISCO UCS SP Select 6248 FI
2 x MDS 9148S 16G FC Switch
Can someone suggest for a best practice to do the migration? Also, appreciate if someone can comment on any compatibility issues.
Thanks a lot.
Jay
