Getting multiple UCSC-C220-M35 warnings all of a sudden?

[baselzind]

all of a sudden a UCS unit started giving multiple warnings , it contain three Solarwinds Vm machines one for data base and two solarwind windows machines , i started getting these mixed warning and im really not sure what to do next please help , here are the alerts:

CPU:-
Processor 2 PVCCP_P2VRHOT - Limit exceeded
Processor 2 PVCCP_P2VRHOT - Limit exceeded
Processor 1 PVCCP_P2VRHOT - Limit exceeded

Temperature:-
System Board 0 PCH_TEMP_SENS --- Lower Non-Critical                 0 Degree
power Supply 2 PSU2_TEMP --- Lower Non-Critical                            0 Degree
Front Panel Board 1 FP_TEMP_SENSOR --- Lower Non-Critical        0 Degree

Fan:-
Fan Device 5 FANS_TACH2 --- Lower Non-Critical

Power:-
Power Supply 2: Running/Full Power-Enabled

Platform Alert:-
System Board 0 power_ON_FAIL - Predictive failure asserted
System Board 30 BIOSPOST_TIMEOUT -

[Philip D'Ath]

Do you have a Cisco maintenance contract?  If so I would contact TAC.  It looks like you have a predicted failure - a failure that has not happened but is predicted.  AKA you need to get the failing bit of hardware replaced before it does fail.

[baselzind]

Also why it says it is overheating but at the same time show zero degrees

[Philip D'Ath]

I don't know.  I just know I would be contacting TAC about this one.

[Keny Perez]

What is your CIMC version?

Can you reset CIMC and see if the errors clear? It could be a false positive.

-Kenny