how to configure direct attach FCOE Storage

[kkp1]

Hi Experts,

Kindly let me know if i can directly connect FCOE link from EMC VNX 5400 to FI 6248 (UCSM 3.1) without MDS/N5K.

Please help me if there is any sample configuration available.

Thanks in Advance....

[Tyler P]

hi see attached doc

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Storage-Mgmt/3-1/b_UCSM_GUI_Storage_Management_Guide_3_1/b_UCSM_GUI_Storage_Management_Guide_3_1_chapter_01110.pdf

[kkp1]

thanks tyler for quick reply.
can i use FCOE with direct attached EMC with FCOE module.

[Qiese Dides]

Hi KK,

Below is a configuration guide example on setting up Direct Attach Storage:

https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-infrastructure-ucs-manager-software/116082-config-ucs-das-00.html

Please let me know if you have any other questions.

- Please rate helpful solutions or mark correct answers so other members can find answers more easily.

- Qiese Dides