11-06-2019 04:00 AM - edited 11-06-2019 04:03 AM
I'm having trouble installing the system on a c22 m3 server with the LSI RAID, does not detect RAIDI've been watching tutorials, I've got it all sorted out. When installed, it simply does not detect RAID
https://www.youtube.com/watch?v=ZKfLK_SeSJg
I'm sorry if the location was wrong but I didn't know where to add a ticket
Solved! Go to Solution.
11-06-2019 05:20 AM - edited 11-06-2019 05:48 AM
Ok, so that's the embedded controller, sometimes called the MegaSR controller.
Windows and most Linux systems support that, if you have the correct driver present.
VMware does not support it.
For your Centos install, do you have the mega_SR driver mounted?
It's usually in the /c600 storage subfolder on the linux drivers ISO.
You may need to use the 'redhat' drivers.
https://software.cisco.com/download/home/284444317/type/283853158/release/4.0(4d)
See https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C240M4/install/C240M4/raid.html#17456 for instructions (which will apply to C22 M3 as well)
Kirk...
11-06-2019 04:09 AM - edited 11-06-2019 04:10 AM
Greetings.
Can you confirm if you are using a LSI 92xx type controller or the embedded one?
If it's one of the 9200 series ones, can you confirm if you have actually created a raid volume/VD prior to attempting to install the OS?
For that type of server, the 9200 series LSI controllers used 'webbios' option ROM utility that was invoked with cntrl + H during POST time.
Also the CIMC, with recent firmware version should also let you create and configure a virtual drive/VD, and mark it as bootable.
Kirk...
11-06-2019 04:49 AM - edited 11-06-2019 04:51 AM
11-06-2019 05:20 AM - edited 11-06-2019 05:48 AM
Ok, so that's the embedded controller, sometimes called the MegaSR controller.
Windows and most Linux systems support that, if you have the correct driver present.
VMware does not support it.
For your Centos install, do you have the mega_SR driver mounted?
It's usually in the /c600 storage subfolder on the linux drivers ISO.
You may need to use the 'redhat' drivers.
https://software.cisco.com/download/home/284444317/type/283853158/release/4.0(4d)
See https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C240M4/install/C240M4/raid.html#17456 for instructions (which will apply to C22 M3 as well)
Kirk...
11-06-2019 05:39 AM - edited 11-06-2019 05:40 AM
11-07-2019 04:01 AM - edited 11-07-2019 04:02 AM
11-07-2019 05:52 AM
Can you tell me which Linux I can install and which drivers exactly?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide