If you are new to our Cisco Data Center & Cloud - Google+ Page, you might find this post to be helpful. We host monthly hangouts, or UCS Tech Talk Series, to help you better understand our products. Google+ Hangout on Air (HOA) are scheduled live streamed webcast that are viewable for anyone on Google + and YouTube. You may find the past hangouts recordings on http://communities.cisco.com/ucs, under "UCS Tech Talk Series." (Screen shot below)
Hello,where in UCS manager do i verify that all traffic is "flowing' thru both fabric's ?we are migrating a pair of 6200 Fi's and before we disable one side of the fabric i wanted a to perform a quick sanity check that exiting traffic is actually fl...
During upgrading the blade server 200 M4 from release 3.1 to 4.1 the upgrade stuck in process "Waiting for Bios post completion information from IBMC error code 1002" and as per Cisco this is a bug, and the round solution "a CMOS clear may be required" bu...
I have a customer with a Cisco UCSM:2x Fibre Interconnects2x Chassis6x B-series blade serversThe customer currently has firmware 3.2(3p) on their system and would like to upgrade to V4.1 (N-1) as they are upgrading their vSphere environment to 6.7u3.From ...
HiI have a UCSC-C220-M5SX server with two UCSC-PCIE-IQ10GF interface cards. The description of UCSC-PCIE-IQ10GF inCCW is Intel X710 Quad-Port 10G SFP+ NIC. Can this interface card use Cisco's SFP-10G-SR module?
Upload the Script to Datastore
1. Browse to any Datastore of ESXi Host2. Upload the folder "lsigetvmware_022817" ex. Suppose the datastore name is "Datastore3"
Run the Commands
Enable SSH of ESXi Host
SSH to ESX...