Hi,
I have found a way to look at the fcoe database.
From UCS interconnect, do connect nxos and then show flogi database. But i am not sure if the command output is a legitimate one as UCS FI CLI guide does not mention about it.
cisco-A-A# connect nxos
cisco-A-A(nxos)# show flogi database
--------------------------------------------------------------------------------
INTERFACE VSAN FCID PORT NAME NODE NAME
--------------------------------------------------------------------------------
vfc757 1025 0xee0000 20:00:00:10:18:6f:d2:03 10:00:00:10:18:6f:d2:03
vfc758 1030 0x7d0001 20:00:00:10:18:6f:d2:5d 10:00:00:10:18:6f:d2:5d
Total number of flogi = 2.
cisco-A-A(nxos)#
Thanks,