04-06-2021 07:17 AM
Hello everyone! I faced such problem, my rack server (UCS C 240 m4) was connected to UCS manager (3.1). At boot, Standalone mode was selected in the CIMC settings. After which I no longer see the server in the GUI (UCS manager) How can I reconnect the server to the manager? Is it enough to enter ip address in CIMC settings or do I need to choose other settings?
Solved! Go to Solution.
04-06-2021 07:33 AM
In the CIMC F8, config, do a reset to factory defaults.
This will force the CIMC to search for UCSM DHCP negotiation.
Also make sure you don't have any cables connected to the 1 Gb LOM or dedicated ports.
Kirk...
04-07-2021 01:07 AM
I had to decommission the server and reconfirm. After that, the server will be successfully added to UCSM.
04-06-2021 07:33 AM
In the CIMC F8, config, do a reset to factory defaults.
This will force the CIMC to search for UCSM DHCP negotiation.
Also make sure you don't have any cables connected to the 1 Gb LOM or dedicated ports.
Kirk...
04-06-2021 09:02 PM
04-06-2021 10:09 PM
I noticed that after rebooting, the screen displays "error getting CIMC IP address"
04-07-2021 01:07 AM
I had to decommission the server and reconfirm. After that, the server will be successfully added to UCSM.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: