cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Field Notice 70545
2318
Views
0
Helpful
4
Replies
leninvs2502
Beginner

How to set RAID 1 in C200-M1

Hi, does anybody know how to set RAID1 in UCS C200-M1?

Thanks in advance

Lenin

1 ACCEPTED SOLUTION

Accepted Solutions

Go into the BIOS of the server and disable quiet boot.  Once this is done reboot the server and enter the LSI config during the boot process.  I think it is a ctrl-S to get into the LSI config.  Once you are in the LSI config you can set the RAID level for the drives.

View solution in original post

4 REPLIES 4
ccietrainee1
Beginner

Do let me know the type of RAID controller being used.

Ram

Thanks for replying ccietrainee1, I've got a C200-M1 with two local disks, 140GB each one, and I want to set RAID 1 between them, how can I see the type of RAID controller in the server or do I have to install it?

I really appreciate your help

Go into the BIOS of the server and disable quiet boot.  Once this is done reboot the server and enter the LSI config during the boot process.  I think it is a ctrl-S to get into the LSI config.  Once you are in the LSI config you can set the RAID level for the drives.

View solution in original post

Thanks a lot jdrurycisco,

I'm using ESX 4.0 Update1, Do I have to reinstall it after change to RAID 1 or it's not necessary?

Very grateful

Lenin

Create
Recognize Your Peers
Content for Community-Ad