HOME#sho run
Building configuration...
Current configuration : 5657 bytes
!
! Last configuration change at 10:51:11 UTC Fri May 17 2013 by admin
!
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname HOME
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
enable secret 5 $1$bgx9$VrtQW3Wg182VyYhKAHLbN.
!
no aaa new-model
!
!
!
memory-size iomem 10
!
crypto pki trustpoint TP-self-signed-1190003239
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1190003239
revocation-check none
rsakeypair TP-self-signed-1190003239
!
!
crypto pki certificate chain TP-self-signed-1190003239
certificate self-signed 01
3082024A 308201B3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31313930 30303332 3339301E 170D3133 30353137 31303333
35315A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 31393030
30333233 3930819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100C002 80BBF151 E095E469 AA7DBB18 2A9E3CC2 4AC223F6 ABE0AF49 876C1203
65D0E246 786F174D E5B7897A 44C5755A 2571E58A 184A6C62 DD992A2A D8A24878
25A8D3C3 03F5D3C2 522EC8BB 302B0CCD 2945087A 7AF01418 D0056679 6F64DB4A
BE2D5DA1 106CD03A 83B422A2 3CCBAE88 F2413123 12269390 6949DFE0 411118E7
8F210203 010001A3 72307030 0F060355 1D130101 FF040530 030101FF 301D0603
551D1104 16301482 12484F4D 452E7777 772E7961 686F6F2E 636F6D30 1F060355
1D230418 30168014 3D2D854D 1203F50D 77F4ABC5 B61CEAF6 C922F4DF 301D0603
551D0E04 1604143D 2D854D12 03F50D77 F4ABC5B6 1CEAF6C9 22F4DF30 0D06092A
864886F7 0D010104 05000381 8100B24C 48BACACE 87ADEA03 386F2045 CC89624A
4EB1AD09 062EB2A4 CF4C96CA 0B2CF001 BD2C3804 8DC47FED 6A5B5F0D 3965AC6E
4FC4682F 707E4132 8F27C083 C7FAE1BD 21D055E6 C79D5DAD 051B6321 D35DB4F2
044E6BBD DAD08B6A 6ED87C7E 08F4F7E1 4EFDFB6F 867AF6FA 84165CFC D219D56F
A82EABD4 AD9CFA24 A5088145 E571
quit
ip source-route
ip routing protocol purge interface
!
!
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool ccp-pool
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
domain-name www.google.com
dns-server 192.168.1.1
lease 0 2
!
!
ip cef
ip domain name www.yahoo.com
ip name-server 84.235.6.55
ip name-server 84.235.57.230
no ipv6 cef
!
!
multilink bundle-name authenticated
license udi pid CISCO881-SEC-K9 sn FCZ1516933C
!
!
username admin privilege 15 password 0 cisco
!
!
!
!
!
!
!
!
!
interface FastEthernet0
!
!
interface FastEthernet1
!
!
interface FastEthernet2
!
!
interface FastEthernet3
!
!
interface FastEthernet4
ip address dhcp
ip access-group 101 in
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
!
!
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 10.10.10.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip nat enable
ip virtual-reassembly
ip tcp adjust-mss 1452
!
!
interface Vlan2
no ip address
ip nat inside
ip virtual-reassembly
!
!
ip default-gateway 192.168.1.1
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
!
ip nat inside source list 101 interface FastEthernet4 overload
ip route 0.0.0.0 0.0.0.0 FastEthernet4
!
access-list 23 permit 10.10.10.0 0.0.0.7
access-list 101 permit ip any any
dialer-list 1 protocol ip permit
no cdp run
!
!
!
!
!
control-plane
!
!
banner exec ^C
% Password expiration warning.
-----------------------------------------------------------------------
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you
want to use.
-----------------------------------------------------------------------
^C
banner login ^C
-----------------------------------------------------------------------
Cisco Configuration Professional (Cisco CP) is installed on this device.
This feature requires the one-time use of the username "cisco" with the
password "cisco". These default credentials have a privilege level of 15.
YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE
PUBLICLY-KNOWN CREDENTIALS
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want
to use.
IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL
NOT BE ABLE TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.
For more information about Cisco CP please follow the instructions in the
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp
-----------------------------------------------------------------------
^C
banner motd ^Cuthorized ^C
!
line con 0
login local
no modem enable
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
password cisco
logging synchronous
login local
transport input telnet ssh
!
scheduler max-task-time 5000
end
