we had a consultant firm that did some penetration test and found out that a few of our UCS-B blades add IPMI over lan Active and so where judged a vulnerability because of some password hack in ipmi 2.0.
so we removed all the policies that activated then as this is not needed with UCSM management.
unfortunately even if we cant get access anymore the Lan port UDP/623 is still answering to ipmiutil discovery tools.
all the servers that where not configured are not showing up but the few that where are. Any way to close them permanently so they don't show up in the penetration test?
How to collect UCS Rack Server Tech support (Command Line) ?
SSH to the server and login with Username and password
Just Copy and Paste below commands for different protocols
CIMC tech support will be collected on the remote machine in som...
Was trying to get neworking to work on a new Ubuntu install on a UCS server. I did a "shutdown -r" and rebooted the server. Now it seems to be stuck in the Aptio setup utility. I either choose "save and exit" or exit without saving changes and I am brough...
Just wonder we recently try to add 2 M200 with firmware 4.1.1b, our UCS manager version is 4.0.2d, we got error said cannot donwgrade. I know we can update ucs manager from 4.0 to 4.1, bur wonder we can downgrade
OpenStack Neutron project offers pluggable framework means you can extend the capability of Neutron by orchestrating the Neutron functions to your upstream networking gears. For example, if you have provisioned a VLAN tagged Neutron network in Op...