we had a consultant firm that did some penetration test and found out that a few of our UCS-B blades add IPMI over lan Active and so where judged a vulnerability because of some password hack in ipmi 2.0.
so we removed all the policies that activated then as this is not needed with UCSM management.
unfortunately even if we cant get access anymore the Lan port UDP/623 is still answering to ipmiutil discovery tools.
all the servers that where not configured are not showing up but the few that where are. Any way to close them permanently so they don't show up in the penetration test?
I was looking for a solution to automate the control of my home VMware servers to save on the power draw by booting them only when needed (vs leaving them running 24x7). The average UCS C-series server costs between $40 to $60 per month to run continuous...
Hi,Working on HX Edge install. Receiving this error VMkernel gateway address to xx.xx.xx.xx as there are no VMkernel interfaces on the same network with that IP address.', One thing to point out is that the servers came with 1G and we replaced i...
Cisco UCS Platform Emulator, Release 4.1(2cPE1)
CONFIGURATION IMPORT NOTE: Importing configuration backups (All, System, or Logical) taken from the UCS Platform Emulator (UCSPE) to physical UCS Manager domains is not recommended or supported...
While this same information is already scattered around the internet, I wanted to present this in a format that is hopefully easily usable by someone that is not powershell savvy, and needs a quick way to track down duplicate MACs.
Apache Spark has been the de-facto standard and world’s leading data analytics platform for implementing data science and machine learning framework.
Spark 3.0, with native GPU support, is something that almost every data scientist and d...