We've been testing iSCSI booting on UCS with 2.0(1t) and the Palo M81KR with an EqualLogic PS6010. We are connecting through a 10GbE switch via an uplink port. However, we've hit a snag and want to see if anyone else has gotten around this.
The EQL shows connections from UCS when booting; however, Windows does not have the Palo drivers and doesn't show the target disk. When adding the M81KR driver, the connection gets dropped so Windows still does not show the target disk.
We've tried connecting the array directly to an appliance port on the FI but got some ENM source pinning failed error, a different issue at this point.
We've also tried slipstreaming all UCS drivers into the Windows media but that doesn't let us proceed either.
We've gotten RHEL6 to install so we know the configuration is viable.
Was trying to get neworking to work on a new Ubuntu install on a UCS server. I did a "shutdown -r" and rebooted the server. Now it seems to be stuck in the Aptio setup utility. I either choose "save and exit" or exit without saving changes and I am brough...
Just wonder we recently try to add 2 M200 with firmware 4.1.1b, our UCS manager version is 4.0.2d, we got error said cannot donwgrade. I know we can update ucs manager from 4.0 to 4.1, bur wonder we can downgrade
OpenStack Neutron project offers pluggable framework means you can extend the capability of Neutron by orchestrating the Neutron functions to your upstream networking gears. For example, if you have provisioned a VLAN tagged Neutron network in Op...
https://soundcloud.com/user-327105904/s7e25-from-the-office-to-anywhere-empowering-secure-remote-work-with-cisco-vdi-solutions As organizations have had to rapidly respond and transition in the face of swift change, Cisco VDI solutions have enabled ...