cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
859
Views
0
Helpful
2
Replies

Memory for Cisco C200m2 rack server

tobias1979
Level 1
Level 1

Hi

I have an C200m2 rack server with 3x2GB of ram memory. I want to extend that to atleast 12Gb of ram how should

Add 1st 8GB module = 3X2GB + 8GB

or remove the old memory and replace it with 3x4GB

//T

1 Accepted Solution

Accepted Solutions

David Alpizar
Cisco Employee
Cisco Employee

Hi Tobias ,

Check this information:

When considering the memory configuration of your server, you should consider the following items:

DIMMs  within the server should all be the same type, speed, and size. Do not  mix different size DIMMs or DIMMs with different clock rates in the same  server. Doing so causes the system to set the memory system speed to  that of the slowest installed DIMMs.

DIMMs can be used either in a one DIMM per Channel (1DPC) configuration or in a two DIMMs per Channel (2DPC) configuration.

There are blue and black DIMM slots. Populate blue slots in a bank first.

Please check the link for further details:

http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/c200m2_lff_specsheet.pdf

Hope this help!

David

View solution in original post

2 Replies 2

David Alpizar
Cisco Employee
Cisco Employee

Hi Tobias ,

Check this information:

When considering the memory configuration of your server, you should consider the following items:

DIMMs  within the server should all be the same type, speed, and size. Do not  mix different size DIMMs or DIMMs with different clock rates in the same  server. Doing so causes the system to set the memory system speed to  that of the slowest installed DIMMs.

DIMMs can be used either in a one DIMM per Channel (1DPC) configuration or in a two DIMMs per Channel (2DPC) configuration.

There are blue and black DIMM slots. Populate blue slots in a bank first.

Please check the link for further details:

http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/c200m2_lff_specsheet.pdf

Hope this help!

David

Thank you David.

//Tobias

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: