04-02-2018 08:38 AM - edited 03-01-2019 01:29 PM
Hi everyone.
I have a two nexus 5596 with unified port, I am using NPIV and FCOE, the VFC ports work correctly, however when you want to use the FC ports, they remain infinitely UP / DOWN.
2018 Apr 2 14:21:46 Nexus1 last message repeated 1 time
2018 Apr 2 14:21:46 Nexus1 %PORT-5-IF_UP: %$VSAN 200%$ Interface fc4/12 is up in mode F
2018 Apr 2 14:21:50 Nexus1 %PORT-5-IF_DOWN_OLS_RCVD: %$VSAN 200%$ Interface fc4/12 is down (OLS received)
2018 Apr 2 14:21:51 Nexus1 last message repeated 1 time
2018 Apr 2 14:21:51 Nexus1 %PORT-5-IF_UP: %$VSAN 200%$ Interface fc4/12 is up in mode F
2018 Apr 2 14:21:55 Nexus1 %PORT-5-IF_DOWN_OLS_RCVD: %$VSAN 200%$ Interface fc4/12 is down (OLS received)
2018 Apr 2 14:21:55 Nexus1 last message repeated 1 time
2018 Apr 2 14:21:55 Nexus1 %PORT-5-IF_UP: %$VSAN 200%$ Interface fc4/12 is up in mode F
2018 Apr 2 14:21:59 Nexus1 %PORT-5-IF_DOWN_OLS_RCVD: %$VSAN 200%$ Interface fc4/12 is down (OLS received)
2018 Apr 2 14:21:59 Nexus1 last message repeated 1 time
2018 Apr 2 14:21:59 Nexus1 %PORT-5-IF_UP: %$VSAN 200%$ Interface fc4/12 is up in mode F
2018 Apr 2 14:22:03 Nexus1 %PORT-5-IF_DOWN_OLS_RCVD: %$VSAN 200%$ Interface fc4/12 is down (OLS received)
when I check through a show flogi database, I can see the ID but after a moment it goes away
Nexus1# sh flogi database
--------------------------------------------------------------------------------
INTERFACE VSAN FCID PORT NAME NODE NAME
--------------------------------------------------------------------------------
fc4/12 200 0x0d00c0 21:00:00:24:ff:19:ae:46 20:00:00:24:ff:19:ae:46
fc4/13 200 0x0d00a0 50:01:43:80:27:2c:2d:c2 50:01:43:80:27:2c:2d:c1
fc4/14 200 0x0d0080 50:01:43:80:27:2c:2d:c5 50:01:43:80:27:2c:2d:c4
vfc43 200 0x0d0020 20:21:00:02:ac:01:f9:fb 2f:f7:00:02:ac:01:f9:fb
vfc44 200 0x0d0000 21:21:00:02:ac:01:f9:fb 2f:f7:00:02:ac:01:f9:fb
vfc45 200 0x0d0060 22:21:00:02:ac:01:f9:fb 2f:f7:00:02:ac:01:f9:fb
vfc46 200 0x0d0040 23:21:00:02:ac:01:f9:fb 2f:f7:00:02:ac:01:f9:fb
vfc4142 200 0x0d0100 50:06:0b:00:00:c3:5e:04 50:06:0b:00:00:c3:5e:05
vfc4142 200 0x0d0200 50:06:0b:00:00:c3:5e:0c 50:06:0b:00:00:c3:5e:0d
vfc4142 200 0x0d0300 50:06:0b:00:00:c3:5e:1c 50:06:0b:00:00:c3:5e:1d
vfc4142 200 0x0d0400 50:06:0b:00:00:c3:5e:14 50:06:0b:00:00:c3:5e:15
vfc4142 200 0x0d0500 50:06:0b:00:00:c3:5e:24 50:06:0b:00:00:c3:5e:25
vfc4142 200 0x0d0600 50:06:0b:00:00:c3:5e:2c 50:06:0b:00:00:c3:5e:2d
Total number of flogi = 13.
Nexus1# sh flogi database
--------------------------------------------------------------------------------
INTERFACE VSAN FCID PORT NAME NODE NAME
--------------------------------------------------------------------------------
fc4/12 200 0x0d00c0 21:00:00:24:ff:19:ae:46 20:00:00:24:ff:19:ae:46
fc4/14 200 0x0d0080 50:01:43:80:27:2c:2d:c5 50:01:43:80:27:2c:2d:c4
vfc43 200 0x0d0020 20:21:00:02:ac:01:f9:fb 2f:f7:00:02:ac:01:f9:fb
vfc44 200 0x0d0000 21:21:00:02:ac:01:f9:fb 2f:f7:00:02:ac:01:f9:fb
vfc45 200 0x0d0060 22:21:00:02:ac:01:f9:fb 2f:f7:00:02:ac:01:f9:fb
vfc46 200 0x0d0040 23:21:00:02:ac:01:f9:fb 2f:f7:00:02:ac:01:f9:fb
vfc4142 200 0x0d0100 50:06:0b:00:00:c3:5e:04 50:06:0b:00:00:c3:5e:05
vfc4142 200 0x0d0200 50:06:0b:00:00:c3:5e:0c 50:06:0b:00:00:c3:5e:0d
vfc4142 200 0x0d0300 50:06:0b:00:00:c3:5e:1c 50:06:0b:00:00:c3:5e:1d
vfc4142 200 0x0d0400 50:06:0b:00:00:c3:5e:14 50:06:0b:00:00:c3:5e:15
vfc4142 200 0x0d0500 50:06:0b:00:00:c3:5e:24 50:06:0b:00:00:c3:5e:25
vfc4142 200 0x0d0600 50:06:0b:00:00:c3:5e:2c 50:06:0b:00:00:c3:5e:2d
Total number of flogi = 12.
Nexus1# 2018 Apr 2 14:29:46 Nexus1 %PORT-5-IF_DOWN_OLS_RCVD: %$VSAN 200%$ Interface fc4/13 is down (OLS received)
2018 Apr 2 14:29:47 Nexus1 last message repeated 1 time
2018 Apr 2 14:29:47 Nexus1 %PORT-5-IF_DOWN_OLS_RCVD: %$VSAN 200%$ Interface fc4/14 is down (OLS received)
Nexus1# sh flogi database
--------------------------------------------------------------------------------
INTERFACE VSAN FCID PORT NAME NODE NAME
--------------------------------------------------------------------------------
fc4/12 200 0x0d00c0 21:00:00:24:ff:19:ae:46 20:00:00:24:ff:19:ae:46
vfc43 200 0x0d0020 20:21:00:02:ac:01:f9:fb 2f:f7:00:02:ac:01:f9:fb
vfc44 200 0x0d0000 21:21:00:02:ac:01:f9:fb 2f:f7:00:02:ac:01:f9:fb
vfc45 200 0x0d0060 22:21:00:02:ac:01:f9:fb 2f:f7:00:02:ac:01:f9:fb
vfc46 200 0x0d0040 23:21:00:02:ac:01:f9:fb 2f:f7:00:02:ac:01:f9:fb
vfc4142 200 0x0d0100 50:06:0b:00:00:c3:5e:04 50:06:0b:00:00:c3:5e:05
vfc4142 200 0x0d0200 50:06:0b:00:00:c3:5e:0c 50:06:0b:00:00:c3:5e:0d
vfc4142 200 0x0d0300 50:06:0b:00:00:c3:5e:1c 50:06:0b:00:00:c3:5e:1d
vfc4142 200 0x0d0400 50:06:0b:00:00:c3:5e:14 50:06:0b:00:00:c3:5e:15
vfc4142 200 0x0d0500 50:06:0b:00:00:c3:5e:24 50:06:0b:00:00:c3:5e:25
vfc4142 200 0x0d0600 50:06:0b:00:00:c3:5e:2c 50:06:0b:00:00:c3:5e:2d
Total number of flogi = 11.
Thanks
some idea what could be happening
Solved! Go to Solution.
04-03-2018 07:56 AM - edited 04-03-2018 07:59 AM
additional questions
- are there FC hosts that work ok ?
- are only the FC tape libraries causing the Problems ?
- can you do a "show interfaces status err-disabled"
- is the tape library on the interop matrix ?
04-04-2018 02:49 PM
Finally we solved the problem by making a software update to the latest version. thanks to all.
04-02-2018 09:00 AM
Hi,
On NPIV, get show flogi internal event-history errors
look for anything being rejected and post here.
Regards,
Carlos
04-02-2018 09:36 AM
Hi Carlos:
1) Event:E_DEBUG, length:73, at 284536 usecs after Mon Apr 2 15:31:08 2018
[102] fs_flogi_send_flogi_reject: mts_q == 0, ifindex 0x118b000, port 0x0
2) Event:E_DEBUG, length:148, at 284532 usecs after Mon Apr 2 15:31:08 2018
[102] fs_flogi_send_flogi_reject(5728):fs_flogi_send_flogi_reject: flogi_fc2_req is FALSE pwwn[21:00:00:24:ff:19:ae:46] vsan[200
] ifindex [0x118b000]
3) Event:E_DEBUG, length:73, at 36400 usecs after Mon Apr 2 15:31:04 2018
[102] fs_flogi_send_flogi_reject: mts_q == 0, ifindex 0x118b000, port 0x0
4) Event:E_DEBUG, length:148, at 36396 usecs after Mon Apr 2 15:31:04 2018
[102] fs_flogi_send_flogi_reject(5728):fs_flogi_send_flogi_reject: flogi_fc2_req is FALSE pwwn[21:00:00:24:ff:19:ae:46] vsan[200
] ifindex [0x118b000]
5) Event:E_DEBUG, length:73, at 740796 usecs after Mon Apr 2 15:30:59 2018
[102] fs_flogi_send_flogi_reject: mts_q == 0, ifindex 0x118b000, port 0x0
6) Event:E_DEBUG, length:148, at 740792 usecs after Mon Apr 2 15:30:59 2018
[102] fs_flogi_send_flogi_reject(5728):fs_flogi_send_flogi_reject: flogi_fc2_req is FALSE pwwn[21:00:00:24:ff:19:ae:46] vsan[200
] ifindex [0x118b000]
7) Event:E_DEBUG, length:73, at 140328 usecs after Mon Apr 2 15:30:51 2018
[102] fs_flogi_send_flogi_reject: mts_q == 0, ifindex 0x118b000, port 0x0
8) Event:E_DEBUG, length:148, at 140324 usecs after Mon Apr 2 15:30:51 2018
[102] fs_flogi_send_flogi_reject(5728):fs_flogi_send_flogi_reject: flogi_fc2_req is FALSE pwwn[21:00:00:24:ff:19:ae:46] vsan[200
] ifindex [0x118b000]
9) Event:E_DEBUG, length:73, at 990327 usecs after Mon Apr 2 15:30:46 2018
[102] fs_flogi_send_flogi_reject: mts_q == 0, ifindex 0x118b000, port 0x0
10) Event:E_DEBUG, length:148, at 990323 usecs after Mon Apr 2 15:30:46 2018
[102] fs_flogi_send_flogi_reject(5728):fs_flogi_send_flogi_reject: flogi_fc2_req is FALSE pwwn[21:00:00:24:ff:19:ae:46] vsan[200
04-02-2018 10:58 AM
Hello,
1)
Do you see "waiting for port mode" ? in the output
2)
Can you open a TAC Service Request?
Regards,
Carlos
04-02-2018 11:16 AM
Carlos:
I don´t see "waiting for port mode", I forced the F mode in the FC 4/12 interface until 4/14, but after a few minutes the interfaces remain in error disable.
2018 Apr 2 17:00:11 NexusA %PORT-2-IF_DOWN_ERROR_DISABLED: %$VSAN 200%$ Interface fc4/12 is down (Error disabled)
2018 Apr 2 17:00:18 NexusA last message repeated 2 times
2018 Apr 2 17:00:18 NexusA %PORT-2-IF_DOWN_ERROR_DISABLED: %$VSAN 200%$ Interface fc4/13 is down (Error disabled)
any ideas?
regards.
04-02-2018 11:19 AM
to verify the config, can you add:
show run interface fc x/y from both sides.
04-02-2018 11:22 AM
Carlos:
interface fc4/12
switchport mode F
switchport trunk allowed vsan 200
switchport trunk mode auto
no shutdown
version 7.1(3)N1(1)
interface fc4/13
switchport mode F
switchport trunk allowed vsan 200
switchport trunk mode auto
no shutdown
version 7.1(3)N1(1)
interface fc4/14
switchport mode F
switchport trunk allowed vsan 200
regards.
switchport trunk mode auto
no shutdown
04-02-2018 11:26 AM
Ca you please remove the pruning, allow all VSANS and let me know if port comes up.
switchport trunk allowed vsan 200
04-02-2018 11:31 AM
Again after a few minutes it has been in error disable
interface fc4/12
switchport mode F
switchport trunk mode auto
no shutdown
2018 Apr 2 17:24:06 NexusA %PORT-2-IF_DOWN_ERROR_DISABLED: %$VSAN 200%$ Interface fc4/14 is down (Error disabled)
regards.
04-02-2018 11:32 AM
shut no shut the interface to get it out of error disable.
04-02-2018 11:41 AM
Carlos:
After executing a "shut & no shut", the interface stays up for a few seconds and then falls into the disable error.
NexusA(config)# int fc 4/12-14
NexusA(config-if)# shutdown
NexusA(config-if)# 2018 Apr 2 17:30:27 NexusA last message repeated 2 times
2018 Apr 2 17:30:27 NexusA %PORT-5-IF_DOWN_ADMIN_DOWN: %$VSAN 200%$ Interface fc4/14 is down (Administratively down)
2018 Apr 2 17:30:27 NexusA %PORT-5-IF_DOWN_ADMIN_DOWN: %$VSAN 200%$ Interface fc4/13 is down (Administratively down)
2018 Apr 2 17:30:27 NexusA %PORT-5-IF_DOWN_ADMIN_DOWN: %$VSAN 200%$ Interface fc4/12 is down (Administratively down)
NexusA(config-if)#
NexusA(config-if)#
NexusA(config-if)# no shutdown
NexusA(config-if)# 2018 Apr 2 17:30:33 NexusA %PORT-2-IF_DOWN_ERROR_DISABLED: %$VSAN 200%$ Interface fc4/14 is down (Error disabled)
2018 Apr 2 17:30:33 NexusA %PORT-2-IF_DOWN_ERROR_DISABLED: %$VSAN 200%$ Interface fc4/12 is down (Error disabled)
2018 Apr 2 17:30:33 NexusA %PORT-5-IF_UP: %$VSAN 200%$ Interface fc4/12 is up in mode F
2018 Apr 2 17:30:33 NexusA %PORT-5-IF_UP: %$VSAN 200%$ Interface fc4/14 is up in mode F
2018 Apr 2 17:30:33 NexusA %PORT-5-IF_UP: %$VSAN 200%$ Interface fc4/13 is up in mode F
NexusA(config-if)#
NexusA(config-if)#
NexusA(config-if)#
NexusA(config-if)# sh flo da
--------------------------------------------------------------------------------
INTERFACE VSAN FCID PORT NAME NODE NAME
--------------------------------------------------------------------------------
fc4/12 200 0x0d00c0 21:00:00:24:ff:19:ae:46 20:00:00:24:ff:19:ae:46
fc4/13 200 0x0d00a0 50:01:43:80:27:2c:2d:c2 50:01:43:80:27:2c:2d:c1
fc4/14 200 0x0d0080 50:01:43:80:27:2c:2d:c5 50:01:43:80:27:2c:2d:c4
Total number of flogi = 13.
NexusA(config-if)# sh co
config-profile configuration copp copyright cores
NexusA(config-if)# sh clock
17:31:23.032 UTC Mon Apr 02 2018
NexusA(config-if)# 2018 Apr 2 17:31:29 NexusA %PORT-2-IF_DOWN_ERROR_DISABLED: %$VSAN 200%$ Interface fc4/14 is down (Error disabled)
2018 Apr 2 17:32:11 NexusA last message repeated 2 times
2018 Apr 2 17:32:11 NexusA %PORT-2-IF_DOWN_ERROR_DISABLED: %$VSAN 200%$ Interface fc4/12 is down (Error disabled)
04-02-2018 11:45 AM
what is the interface configuration no the NPV?
04-02-2018 11:48 AM
04-02-2018 11:59 AM
If you are showing interface ports for the NPV device then
the port type must be NP.
04-02-2018 12:15 PM
Carlos: I am using NPIV and FCoE, not NPV.. so I can only configure the following:
Nexus_A(config)# int fc 4/12
Nexus_A(config-if)# switchport mode ?
E E mode
F F mode
SD SD mode
auto Auto mode
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: