08-13-2013 11:48 AM - edited 03-01-2019 11:11 AM
I have 4 x 2.1(2a) UCS Domains connected to aUCS Central 1.1a server. Everything is showing up correctly EXECPT for the Servers tab. It is only showing templates in the "Local Service Profile Templates" section. There are no "Local Service Profiles" showing up in the list for any of the 231 servers on the 4 domains.
The UCS Central software was updated to version 1.1a from 1.0a after the upgrade of the 4 UCS domains to 2.1(2a).
Any troubleshooting help or direction would be appreciated.
- Chris
08-13-2013 11:27 PM
Hello Chris,
A few questions
Are you using Filter to view only Local service profiles ?
Are you able to view it from CLI ?
connect resource-mgr
scope org
show local-service-profile
Is this fresh installation of Central or upgraded from 1.0 version ?
Padma
08-14-2013 06:06 AM
Hi Padma,
Filter = off
The CLI commands give me a list of all the Service Profiles correctly in "Instantiated" state.
This is a UCS Central upgrade from 1.0.
08-14-2013 06:20 AM
Hello Chris,
As CLI displays it correctly, can you please accessing Central from different system / web browser and verify the outcome ?
If the outcome is same on different system / web browsers, please collect UCS Central techsupport and open a TAC service request.
Collecting Central Techsupport bundle
http://www.cisco.com/en/US/products/ps12502/products_tech_note09186a0080c0c917.shtml
Padma
08-16-2013 06:58 AM
CSCUi67339 opened to track this issue
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: