01-22-2011 01:22 AM - edited 03-01-2019 09:48 AM
Hello Experts,
We need a server with 3 x full-height and 2 x low profile PCI slots. Is it possible to have this using PCI riser card for UCS C-200 M2 ?
If yes, what is the part number for this card , because i couldn't find it in cisco documentation.
Thanks in advance,
Mohammad
Solved! Go to Solution.
01-23-2011 12:11 PM
It is not possible to replace the adapter riser card in a C200 M2 with one that can fit 5 adapters.
The C200 M2 is a 1U rack server. It is shipped with a riser card that can hold a full height and low profile adapter card. There is not enough physical space in the 1U server to hold 5 adapter cards.
The C210 and C250 rack servers are 2U high and are shipped with a riser card that can accomidate 2 low profile and 3 full height adapters, although in almost all C210 and C250 configrations a low profile raid controller will occupy one low profile slot.
01-23-2011 12:11 PM
It is not possible to replace the adapter riser card in a C200 M2 with one that can fit 5 adapters.
The C200 M2 is a 1U rack server. It is shipped with a riser card that can hold a full height and low profile adapter card. There is not enough physical space in the 1U server to hold 5 adapter cards.
The C210 and C250 rack servers are 2U high and are shipped with a riser card that can accomidate 2 low profile and 3 full height adapters, although in almost all C210 and C250 configrations a low profile raid controller will occupy one low profile slot.
01-24-2011 01:49 AM
Thanks a lot David.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: