We have multiple port channels configured on FI-A and FI-B to the upstream switches. Now whenever we need to add a new VLAN to UCSM, we need to allow that VLAN into one of these port channel in UCSM for both Fabric A and B.
Now I would like to check what VLAN's are added to what port channel in UCSM using UCS Powertool.
Is it possible to get the information using UCS powertool?
Mega raid option does not appear when the server comes to the bios screen, I see the Megar aid PCI card when I look at the bios but I can not do in the configuration because all setting is disable. There are three from this server and they all have t...
•This field guide is meant to be used by customers for cleaning up an existing HyperFlex Edge deployment for the purposes of reinstalling.
•The procedures in this guide are DESTRUCTIVE. Make sure all VMs and data are backed up before proceedi...
i have installed two numbers of cisco VIC 1385 card on UCS C240M5 server but in CIMC VIC adapter section only one card is listed. i have installed the cards in slot number 4 & 5. in VIC adapter section only slot 5 is showing. In PCI adapter i could se...