Practical steps required to restrict a particular user to perform operations ONLY on Chassis 2 servers in a UCS domain...?
Within UCSM, we need to define a particular user (John for instance) whose rights will be limited to performing say 'server equipment' operations exclusively on servers installed in Chassis 2 for instance, if we consider a multiple chassis domain.
What are the steps required in order to impement this function..?
Mega raid option does not appear when the server comes to the bios screen, I see the Megar aid PCI card when I look at the bios but I can not do in the configuration because all setting is disable. There are three from this server and they all have t...
•This field guide is meant to be used by customers for cleaning up an existing HyperFlex Edge deployment for the purposes of reinstalling.
•The procedures in this guide are DESTRUCTIVE. Make sure all VMs and data are backed up before proceedi...
i have installed two numbers of cisco VIC 1385 card on UCS C240M5 server but in CIMC VIC adapter section only one card is listed. i have installed the cards in slot number 4 & 5. in VIC adapter section only slot 5 is showing. In PCI adapter i could se...