12-06-2012 05:52 AM - edited 03-01-2019 10:45 AM
Hello,
On Nexus, is-it possible to configurate Read-Only zoning ? if yes, how ?
On MDS, we have the attribute "read-only"
A9124-2# config t
Enter configuration commands, one per line. End with CNTL/Z.
A9124-2(config)# zone name Z_sresx1_HBA1_CX340_SPB_P0 vsan 2
A9124-2(config-zone)# attribute read-only
ENTERPRISE_PKG license not installed. Read Only Zoning feature will be shut down after grace period of approximately 120 day(s).
Thanks for your feedback
Nicolas.
Solved! Go to Solution.
12-08-2012 09:03 PM
You can use fabric manager to create read-only zones.
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/fm/zone.pdf
Regards,
Robert
12-08-2012 09:03 PM
You can use fabric manager to create read-only zones.
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/fm/zone.pdf
Regards,
Robert
12-10-2012 04:40 AM
Thx, Robert
01-08-2013 01:52 AM
Hi Robert,
I come back on this post. DCNM 5.2 has been installed, yesterday ; but when i want to insert a new zone, i do not have any option as show on page 16-9 of your url.
Do you have any idea about that ?
many thx in advance.
Nicolas
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide