12-06-2012 05:52 AM - edited 03-01-2019 10:45 AM
Hello,
On Nexus, is-it possible to configurate Read-Only zoning ? if yes, how ?
On MDS, we have the attribute "read-only"
A9124-2# config t
Enter configuration commands, one per line. End with CNTL/Z.
A9124-2(config)# zone name Z_sresx1_HBA1_CX340_SPB_P0 vsan 2
A9124-2(config-zone)# attribute read-only
ENTERPRISE_PKG license not installed. Read Only Zoning feature will be shut down after grace period of approximately 120 day(s).
Thanks for your feedback
Nicolas.
Solved! Go to Solution.
12-08-2012 09:03 PM
You can use fabric manager to create read-only zones.
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/fm/zone.pdf
Regards,
Robert
12-08-2012 09:03 PM
You can use fabric manager to create read-only zones.
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/fm/zone.pdf
Regards,
Robert
12-10-2012 04:40 AM
Thx, Robert
01-08-2013 01:52 AM
Hi Robert,
I come back on this post. DCNM 5.2 has been installed, yesterday ; but when i want to insert a new zone, i do not have any option as show on page 16-9 of your url.
Do you have any idea about that ?
many thx in advance.
Nicolas
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: