Regarding WWN of HBA

[Ruhul]

Hi,

I need help some help for UCS B series and C series device for getting the HBAs  detail using MIB I have checked the cucsAdaptorHostFcIfTable table [CISCO-UNIFIED-COMPUTING-ADAPTOR-MIB ]  where I able to get the details for HBAs but in the table it is returning WWN information, I have checked all the WWN available in the table cucsAdaptorHostFcIfWwn , cucsAdaptorHostFcIfOriginalNodeWwn ,cucsAdaptorHostFcIfOriginalWwn  none of this is returning any value but cli has the information of the WWN below is the snipped from CLI

sjo-i1-fab1-A# scope adapter 2/1/1

sjo-i1-fab1-A /chassis/server/adapter # show host-fc-if

FC Interface:

    Id: 1

    Wwn: 20:02:07:97:A0:00:00:4E

    Original Wwn: 20:00:00:26:51:09:5F:6C

    Model: ISP2432-based 4Gb Fibre Channel to PCI Express HBA

    Name: fc0

    Operability: Operable

    Order: 3

    PCI Addr: 04:00.0

    Persistent Binding: Disabled

    Side: Left

    Max Data Field Size: 2048

    Fabric ID: A

    Port ID: 1

    Slot ID: 1

    Peer Port ID: 0

    Peer Slot ID: 0

    Peer Chassis ID: N/A

    Current Task:

    Id: 2

    Wwn: 20:02:07:97:B0:00:01:4E

    Original Wwn: 21:00:00:26:51:09:5F:6D

    Model: ISP2432-based 4Gb Fibre Channel to PCI Express HBA

    Name: fc1

    Operability: Operable

    Order: 4

    PCI Addr: 04:00.1

    Persistent Binding: Disabled

    Side: Right

    Max Data Field Size: 2048

    Fabric ID: B

    Port ID: 2

    Slot ID: 1

    Peer Port ID: 0

    Peer Slot ID: 0

    Peer Chassis ID: N/A

    Current Task:

sjo-i1-fab1-A /chassis/server/adapter #

So can anybody tell me If I am doing right MIB table query

Thank & Regards

Ruhul

[joemar]

If you are willing to use PowerShell with PowerTool for UCS I have a WWPN/WWNN collector tool posted on the communities site at: UCS WWPN Collector

I hope this helps you!

Joe

[Ruhul]

Thanks Joe,

But I need to collect it from SNMP as my application can connect the device via CLI or snmp.

Any point of contact for SNMP related information

Thanks & Regards

Ruhul

[joemar · Accepted solution]

Have you looked at: ftp://ftp.cisco.com/pub/mibs/supportlists/ucs/ucs-manager-supportlist.html

Also, all the right people are on this community forum who would know about SNMP, but you could also contact TAC or your account or channels team

[Ruhul]

Thanks Joe,

Got help from UCS device bu that particular MIB file has some issue so they are check it.

Thanks & Regards

Ruhul