06-05-2017 01:03 PM - edited 03-01-2019 01:12 PM
I have a HyperFlex that has been sitting for a few months and was wondering how does one get the version installed from the factory? Can you do a "show ver" after you configure the fiS?
tHANKS
Solved! Go to Solution.
06-09-2017 08:02 AM
ESXi comes factory installed onto the HX converged nodes. The HX installer is what deploys the HX software, configures the environment and deploys the storage controller VMs. Here are the software links: https://software.cisco.com/download/release.html?mdfid=286305544&softwareid=286305994&release=2.1(1b)&relind=AVAILABLE&rellifecycle=&reltype=latest
Please review the following link for the Preinstall checklist and getting started guide: http://www.cisco.com/c/en/us/support/hyperconverged-systems/hyperflex-hx-data-platform-software/products-installation-and-configuration-guides-list.html
06-09-2017 08:02 AM
ESXi comes factory installed onto the HX converged nodes. The HX installer is what deploys the HX software, configures the environment and deploys the storage controller VMs. Here are the software links: https://software.cisco.com/download/release.html?mdfid=286305544&softwareid=286305994&release=2.1(1b)&relind=AVAILABLE&rellifecycle=&reltype=latest
Please review the following link for the Preinstall checklist and getting started guide: http://www.cisco.com/c/en/us/support/hyperconverged-systems/hyperflex-hx-data-platform-software/products-installation-and-configuration-guides-list.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide