cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

1033
Views
0
Helpful
1
Replies
Highlighted
Contributor

Server 2008SP2 raid controller driver for UCS C200M1?

Since Windows 2008 is a couple years old, it doesn't have a built in raid controller driver for UCS C200M1 servers.  Windows did not discover the RAID controller in the server, and none of the drivers I've downloaded from Cisco appear to be correct.

Setting this up for Cisco Secure ACS 4.2(1), thought maybe someone here had played with some UCS C-Series gear...

Everyone's tags (3)
1 REPLY 1
Cisco Employee

Re: Server 2008SP2 raid controller driver for UCS C200M1?

Jason,

You didn't mention which raid controller you have in the C200.

If it's the on board ICH10R this document may help out

http://www.cisco.com/en/US/docs/unified_computing/ucs/c/sw/os/install/RAID.html

If this is the case, once you've configured BIOS and the ICH10R lun, you'll need to load the storage driver. It's under the Intel folder in the drivers IOS for storage. Reason? Its included in Intel's chip set even though it's labeled LSI.

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here