Server ports are used to connect to either chassis IOM or FEX modules for c-series management. If you look at the configuration of the server port from the CLI you will see it is in switchport mode fex-fabric. Currently, it is not possible to connect a c-series rack server directly to the FI without a FEX module in between.
Below is some information on managing c-series rack servers through UCSM if you are interested:
What Biran pointed out above is correct, let's remeber that IOMs and Nexus 2K (used to integrate a rack server to UCSM), both are Fabric Extenders (FEX's) in consequence, one or another connection will require you to configure those ports as server ports.
This process only requires a right-click on the port and choose the optio to configure as such.
Was trying to get neworking to work on a new Ubuntu install on a UCS server. I did a "shutdown -r" and rebooted the server. Now it seems to be stuck in the Aptio setup utility. I either choose "save and exit" or exit without saving changes and I am brough...
Just wonder we recently try to add 2 M200 with firmware 4.1.1b, our UCS manager version is 4.0.2d, we got error said cannot donwgrade. I know we can update ucs manager from 4.0 to 4.1, bur wonder we can downgrade
OpenStack Neutron project offers pluggable framework means you can extend the capability of Neutron by orchestrating the Neutron functions to your upstream networking gears. For example, if you have provisioned a VLAN tagged Neutron network in Op...
https://soundcloud.com/user-327105904/s7e25-from-the-office-to-anywhere-empowering-secure-remote-work-with-cisco-vdi-solutions As organizations have had to rapidly respond and transition in the face of swift change, Cisco VDI solutions have enabled ...