SNMP on the 6120 fabric interconnect

[khdinh]

Hi all,

I'm trying to get some stats on the 6120 through SNMP can't seem to find what I need which is cpu utilization, memory utilization, and throughput on both ethernet and fibre channel ports.  Is this something that I should be able to get through SNMP?  If so, please show me how.  I did a full snmp walk but couldn't find the stats above.  If not, how could I query for this data?

Thanks!

Khoi

[skint]

Hi,

You probably want to check out this thread:

https://supportforums.cisco.com/message/680749

The 6120 and 5000 are basically the same hardware, so it uses the same MIBs.

-skint

[khdinh]

Thanks, skint!

[Jeremy Waldrop]

UCS firmware 1.3 that was relased last week has new SNMP traps for chassis and blades.

UCS SNMP MIBs can be accessed here:

http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

http://www.cisco.com/en/US/docs/unified_computing/ucs/release/notes/ucs_22863.html#wp101289