I'm attempting to set up SNMP statistics polling for the 5108 Chassis with 4 half width blade servers. I can get SNMP data from the 6120 Fabric Extender just fine such as IFs and such, but I don't see any OIDs corrisponding to the chassis.
Is there a separate host I should poll for the chassis, or perhaps a different community name?
I'm specifically looking to monitor power draw from the four Chassis PSUs, as well as the two FE PSUs.
Off topic maybe. But if you aim Cacti at an FI, you and use the standard Cisco template, you can get the interconnects. That is about all that works. It does show the vHBA/vNIC's but no data. Would be nice if that worked.
Step by Step Process to Find UCS Drivers and Install on UCS-C series(Rack Servers)
How to find Compatible Drivers:
Use Cisco UCS HCL Tool to Find the Drivers:
Select the options in the drop down as p...
Cisco UCS Platform Emulator, Release 4.2(2aPE1)
CONFIGURATION IMPORT NOTE: Importing configuration backups (All, System, or Logical) taken from the UCS Platform Emulator (UCSPE) to physical UCS Manager domains is not recommended or supported...
Our partnership with NetApp is stronger than ever with joint engineering development of the new FlexPod XCS. Introducing a new level of visibility and automation that can help propel your journey to hybrid cloud. The Cisco Intersight™ cloud operations p...
There is a prevalence of network threats across the world, and the rate, at which these threats continue to emerge, is more rapid than ever before. Cisco Next Generation Firepower (CNGFW) security technologies is information security service that provides...
Upload the Script to Datastore
1. Browse to any Datastore of ESXi Host2. Upload the folder "lsigetvmware_022817" ex. Suppose the datastore name is "Datastore3"
Run the Commands
Enable SSH of ESXi Host
SSH to ESX...