During the implementation of UCS Blades I found a number of issues that have not been solved. I need to monitor the UCS solution through a NMS with traps and monitoring certain items. To do this I require deliver the MIBS to the Monitoring group and tell the OIDs to monitor certain things but I dont found especific documentation about this. I need to monitor things like the states of the fans, cpu, memory and connections.
The solution consists of:
Fabric Interconnects: 2 x 6140XP
Chassis: 9 x 5108
Servers: 70 x B230M2
Although i need apply certain security to SNMP like ACL to secure the solution in the Customer Environment.
UCS MIBs are available here for download
MIB reference guide
Thanks for your response. But, how i find the OIDs especficis to monitor certain things? (for example status of the fans). I need to know especific OID to monitor.
Currently I am not aware of doc or tool that provides direct translation of UCS MIB objects.
OID for FAN inventory -- 188.8.131.52.184.108.40.206.7220.127.116.11
OID for fault table -- 18.104.22.168.22.214.171.124.7126.96.36.199.1
Alternate way is to load the MIBs and browse the table for required objects.
Thank you for this objects but i need more than this. Please send me a tool to find the UCS MIB objects or another one that have any usefull guide.
This the reference guide for UCS MIBs:
Or go over the supported MIBs:
Based on the that, you can then go into the OID repository and see what OIDs are available in the specific MIB:
Hope it helps,
Hi @bobbywayne08569 ,
To locate any desired OID, go the supported MIB list by UCS C: ftp://ftp.cisco.com/pub/mibs/supportlists/ucs/
Or you can find additional details about the MIBs here: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/mib/b-series/b_UCS_MIBRef/UCS_MIBRef_chapter_01000.html#reference_935B3C0D78E14A14B8D36FBD4A8D2883
Once you know which MIB contains the desired info, go and see all OIDs using this: ftp://ftp.cisco.com/pub/mibs/oid/
Hope it helps,