UCS 220 M4S - ESXI 6.0/6.5 Installation stuck on Disk Details
i'm trying to upgarde our Cisco BE6000 ESXi 5.5.0 (C220-M4) with an Cisco Custom ESXi 6.5.0 iso, but the install alwayys stuck on the Disk Details of the RAID5 Volume (UCSC-MRAID-12G) (Automatically shown after the Gathering Information of local Disks). It is Impossible to Accept The Screen and proceed withg the installation. Our Cisco ESXi is installed on the RAID 5 Virtual Drive.
I'm using Windows Devices to manage the cucs kvm. We also tried to attach an USB Keyboard directly to the UCS220 and press enter, but the problem stays there. It seems thet when pressing enter the Disk Details screen disappears and then automatically pops up again.This happens very fast , so that it is impossible to hit other keys in between.
could it be that i have to use the cisco physical KVM-Front-Port adapter and attach real devices and do nothing over the cimc?
I have used the offline Bundles and do an inplace update of the esxi version over ssh and reboot. This worked fine. After that I tried again to boot and install from iso and got the same error. Now I decide to do all the esxi upgrades via offline Bundles.
How to collect UCS Rack Server Tech support (Command Line) ?
SSH to the server and login with Username and password
Just Copy and Paste below commands for different protocols
CIMC tech support will be collected on the remote machine in som...
Was trying to get neworking to work on a new Ubuntu install on a UCS server. I did a "shutdown -r" and rebooted the server. Now it seems to be stuck in the Aptio setup utility. I either choose "save and exit" or exit without saving changes and I am brough...
Just wonder we recently try to add 2 M200 with firmware 4.1.1b, our UCS manager version is 4.0.2d, we got error said cannot donwgrade. I know we can update ucs manager from 4.0 to 4.1, bur wonder we can downgrade
OpenStack Neutron project offers pluggable framework means you can extend the capability of Neutron by orchestrating the Neutron functions to your upstream networking gears. For example, if you have provisioned a VLAN tagged Neutron network in Op...