04-04-2018 01:15 PM
Hi Guys,
I'm new to the UCS but need to investigate upgrade to the 3.2.3 from 2.2.6C for 2 reasons
Upgrade to VMware esxi 6.5 and CPU security patches.
Does direct upgrade from 2.2.6C to 3.2.3 supported and recommended or there is another better way?
Solved! Go to Solution.
04-04-2018 01:18 PM
Hello,
An upgrade from 2.2.6 to 3.2 is going to require a few steps.
First you will need to make sure you do not have any deprecated hardware for the 3.X release. Then you will need to upgrade from 2.2.6 to 2.2.8 to 3.2. You may also choose to go from 2.2.6 to 3.1 to 3.2. Since there are major changes from 2.2.6 to 3.2, we require a multi-step upgrade.
More info in the 3.2 Release notes - https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/CiscoUCSManager-RN-3-2.html
04-04-2018 01:18 PM
Hello,
An upgrade from 2.2.6 to 3.2 is going to require a few steps.
First you will need to make sure you do not have any deprecated hardware for the 3.X release. Then you will need to upgrade from 2.2.6 to 2.2.8 to 3.2. You may also choose to go from 2.2.6 to 3.1 to 3.2. Since there are major changes from 2.2.6 to 3.2, we require a multi-step upgrade.
More info in the 3.2 Release notes - https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/CiscoUCSManager-RN-3-2.html
04-04-2018 01:38 PM
Thanks Wesley!
I wonder if Spectre/Meltdown firmware upgrade will be released for the 2.2.8? Its old firmware but sounds like an update to the 2.2.8 is safer comparing to big jump to 3.1!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: