I am using UCS C 220 M3 server and it has 8 HDD. I created RAID for redundancy and installed call manager custom software on it. Now in the network topology there are two core switches. I connected the UCS server on first core switch from Gig port 1 of the server.
Now client is Demanding to connect on other core switch also. I am aware of the concept of teaming and i did it many times on microsoft server but either on the single switch or on the VSS system
Here the scenario is core switch 1 and cor switch 2 are two seperate device. Indeed there is a ether channel between them but these switches are not virtual.
Kindly suggest the solution how i can achieve the redundancy for UCS 220 server.
Was trying to get neworking to work on a new Ubuntu install on a UCS server. I did a "shutdown -r" and rebooted the server. Now it seems to be stuck in the Aptio setup utility. I either choose "save and exit" or exit without saving changes and I am brough...
Just wonder we recently try to add 2 M200 with firmware 4.1.1b, our UCS manager version is 4.0.2d, we got error said cannot donwgrade. I know we can update ucs manager from 4.0 to 4.1, bur wonder we can downgrade
OpenStack Neutron project offers pluggable framework means you can extend the capability of Neutron by orchestrating the Neutron functions to your upstream networking gears. For example, if you have provisioned a VLAN tagged Neutron network in Op...
https://soundcloud.com/user-327105904/s7e25-from-the-office-to-anywhere-empowering-secure-remote-work-with-cisco-vdi-solutions As organizations have had to rapidly respond and transition in the face of swift change, Cisco VDI solutions have enabled ...