02-25-2013 04:43 AM - edited 03-01-2019 10:54 AM
Hi,
In one of our UCS C 210 M2 server the DVD Drive is not working. Whenever i use a bootable CD it will not boot using that CD. When i checked the boot order option i dont see the CD/DVD Drive. Then i checked in BIOS and found out that DVD Drive is not visible in BIOS also.
Is there anyway to make this work. The CD/DVD Drive is SATA type.
Krishna.
Solved! Go to Solution.
02-25-2013 01:04 PM
Krishna,
If you don't see it in BIOS, try and check that the SATA cable is firmly seated into both the DVD drive and the chassis. Or, possibly re-seat the cable.
Thanks,
Dave
02-25-2013 06:03 AM
Hello Krishna,
Just to isolate the boot from DVD issue, are you view / access the D contents from OS when insert the CD ?
If OS is able to detect CD contents, then DVD drive is good.
Padma
02-25-2013 01:04 PM
Krishna,
If you don't see it in BIOS, try and check that the SATA cable is firmly seated into both the DVD drive and the chassis. Or, possibly re-seat the cable.
Thanks,
Dave
02-26-2013 02:32 AM
Thank You David. It worked. I reseated the cables once again.
Krishna
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: