Hi all
I have just updated 2 x C220 M3 and 1 x C240 M3 servers to 3.0(4i)
Having checked over the installed firmware revisions i can see the c240 has the same version for both Fw image 1 & 2.
The C220's however show the running version as 3.0(4i) but the backup as 2.0(3i)
I used the ISO to update them all including the bios etc, and followed the same procedure.
ANy clues as to how i can update the backup FW image to be the same as the running?
Thanks in advance.
Karl
