cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3558
Views
0
Helpful
3
Replies
R A Beginner
Beginner

UCS C220 Booting issue -stuck in Shell

Hi All
We have seen issue where UCS while booting up it stuck in Shell> prompt .
we try to replace second HD drive by first one but the issue still .
we have only one boot  option as appeared on photo.
kindly find attached screen shot of this issue .
Please help me to solve this issue .

3 REPLIES 3
Cisco Employee

Hello,

Hello,

What is the status of the RAID controller in the CIMC? Did this server work before? I would ensure that the PCIE slot is enabled for the controller, it appears healthy in CIMC, and you can see the option ROM when it boots.

HTH,

Wes

Highlighted
R A Beginner
Beginner

Hi Wesley,Thanks for your

Hi Wesley,

Thanks for your help,The server worked fine before  but now i can't get CIMC ,Just when operate it ,it stuck on shell prompt as appeared on attached files .

any suggestion please to solve this issue .

Thanks 
Remon

Cisco Employee

Greetings.

Greetings.

Your boot options don't show any options other than NIC PXE boot and the UEFI shell you are hitting.

As Wes mentioned, you need to know what it was you were actually booting to before... Was it the embedded raid controller, a PCI-E raid controller, SD card, etc,etc.

Thanks,

Kirk...

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards