I have an issue on one of our UCS server wherein the LAN 1 is not working. In the past days this was working and the server is accessible on the network.
Upon checking it physically, the LAN 1 is not working even it is connected to a known working port on the switch. If i connect my laptop directly to the LAN 1 of the server the NIC will lit and will work and can be accessed on my laptop directly. But when connected to switch it won't work.
Tried to used other LAN cables and also placed it to other working port on the switch.
All the UCS servers are connected on the same switch and only this server have the issue.
- I'm not using UCSM to managed the server, just the CIMC. When i say LAN 1 it's the physical NIC 1 of the server which is not working if i connect to the switch. Management port (CIMC) and LAN 2 is working. I'm just using the Cisco unmanaged SMB switch (SF100D-8ports). I used this kind of switch for staging purposes and the servers are not yet on production. I have 6 servers for staging and only this one server have the issue.
I'm running version 2.0.8d for C220 M3 rack mount servers.
Right now i managed the server using LAN 2. I'm using VMware ESXi 5.5 for the servers.
i have installed two numbers of cisco VIC 1385 card on UCS C240M5 server but in CIMC VIC adapter section only one card is listed. i have installed the cards in slot number 4 & 5. in VIC adapter section only slot 5 is showing. In PCI adapter i could se...
One of the great benefits of deploying Cisco's Container Platform on Cisco Hyperflex is the ability to get persistent storage for containers out of the box with minimal configuration. This works well for containers where you require the data to surv...
There has been a few announcements lately regarding Cisco's Container Platform (a.k.a: CCP) and they've all been good. Having integration with AWS allows CCP to deploy Kubernetes clusters on vSphere or EKS from the same control point. But anot...