05-08-2014 07:20 PM - edited 03-01-2019 11:39 AM
Hello,
I have a UCS C220 M3 server. with 8 hard drives in it. I am going to install only CUCM and Unity on this server. (4K users).
The server comes without RAID configuration.
Cisco recommends RAID 5. I hoped use a RAID 6.
The space is reduced from 1.9 to 1.6.
Could there be any further problem when using RAID 6 on this server?.
Solved! Go to Solution.
05-08-2014 10:33 PM
Hi jcontreras,
You want to make sure you follow Cisco recommendations to continue getting support from TAC in case you run into any problems with your set up.
Please take a look at the post below, see first comment from Daniel Laden.
https://supportforums.cisco.com/discussion/11692236/ucs-c220-m3-raid-configuration
Let me know if this help
05-08-2014 10:33 PM
Hi jcontreras,
You want to make sure you follow Cisco recommendations to continue getting support from TAC in case you run into any problems with your set up.
Please take a look at the post below, see first comment from Daniel Laden.
https://supportforums.cisco.com/discussion/11692236/ucs-c220-m3-raid-configuration
Let me know if this help
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: