I have a C3260 with two server nodes. Each server node has two 40Gb uplinks ports. I have created 5 vNics for each server node. My northbound switch is two 10Gb fex attached to two Nexus 5548 switchs using enhanced VPC.
Since the 5548 are 10Gb switches and the C3260 is 40Gb I have attached them with a 4X10 Gb direct attach break out cable.
My question is if I attach more then one of the 4X10 cables on the fex side how does the C3260 handle this? I tried configuring the two ports on the fex as a port channel, but the port channel never comes up. There is no option on the C3260 on how to handle two uplinks from same port on the C3260 SIOC.
If i leave the ports configured independently they both come up, but that doesnt seem correct.
Step by Step Process to Find UCS Drivers and Install on UCS-C series(Rack Servers)
How to find Compatible Drivers:
Use Cisco UCS HCL Tool to Find the Drivers:
Select the options in the drop down as p...
Cisco UCS Platform Emulator, Release 4.2(2aPE1)
CONFIGURATION IMPORT NOTE: Importing configuration backups (All, System, or Logical) taken from the UCS Platform Emulator (UCSPE) to physical UCS Manager domains is not recommended or supported...
Our partnership with NetApp is stronger than ever with joint engineering development of the new FlexPod XCS. Introducing a new level of visibility and automation that can help propel your journey to hybrid cloud. The Cisco Intersight™ cloud operations p...
There is a prevalence of network threats across the world, and the rate, at which these threats continue to emerge, is more rapid than ever before. Cisco Next Generation Firepower (CNGFW) security technologies is information security service that provides...
Upload the Script to Datastore
1. Browse to any Datastore of ESXi Host2. Upload the folder "lsigetvmware_022817" ex. Suppose the datastore name is "Datastore3"
Run the Commands
Enable SSH of ESXi Host
SSH to ESX...