cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
871
Views
0
Helpful
3
Replies

UCS CANNOT flogi to SAN switch

xiazhen01
Level 1
Level 1

Hi, expert

 

     could anyone help me for the UCS  problem?

 

    description my problem.

   1、 the type of device is  UCS 5108 MINI. the blade server is B200M3.

   2、 when the profile was created  complete , include design to the blade.

   3、 login to SAN switch , do't found out the WWN of the blade server. 

   4、login to FI, display  the below error message, please refer the attachment picture.

   Have ever try the below the action

   1、reinstall the blade server .

   2、recreate profile. 

   3、 replace a new blade server.

   the result is same .  

appreciate  anyone reply  

          

         

 

    

3 Replies 3

mojafri
Cisco Employee
Cisco Employee

Hi @xiazhen01,

Please share below details: 

 

1. UCS firmware version?

2. UCS in FC switching or end-host mode? 

3. Status of FC/FCoE uplink? 

4. Are you using native FC or FCoE? 

5. Uplink switch model & version. If mds, please provide "show flogi internal error" output. 

6. Was this working before? 

 

Regards,

MJ

HI,MJ:

1. UCS firmware version?

A: 3.2(3h)B

2. UCS in FC switching or end-host mode?

A: end-host mode

3. Status of FC/FCoE uplink?

A: FC

4. Are you using native FC or FCoE?

A:FC

5. Uplink switch model & version. If mds, please provide "show flogi internal error" output.

A: for the switch mode &version , please refer the following

ntcloud-mds9124# show version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html
Copyright (c) 2002-2015, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.

Software
  BIOS:      version 1.0.19
  loader:    version N/A
  kickstart: version 5.2(8h)
  system:    version 5.2(8h)
  BIOS compile time:       02/01/10
  kickstart image file is: bootflash:/m9100-s2ek9-kickstart-mz.5.2.8h.bin
  kickstart compile time:  12/25/2020 12:00:00 [04/28/2016 16:37:28]
  system image file is:    bootflash:/m9100-s2ek9-mz.5.2.8h.bin
  system compile time:     4/30/2016 23:00:00 [04/28/2016 16:58:40]


Hardware
  cisco MDS 9124 (1 Slot) Chassis ("1/2/4 Gbps FC/Supervisor-2")
  Motorola, e500  with 516128 kB of memory.
  Processor Board ID JAF1751ADTL

  Device name: ntcloud-mds9124
  bootflash:     250880 kB
Kernel uptime is 56 day(s), 0 hour(s), 26 minute(s), 41 second(s)

Last reset at 459697 usecs after  Tue Nov  6 22:09:22 2018

  Reason: Reset Requested by CLI command reload
  System version: 5.2(8h)
  Service:
ntcloud-mds9124#

for the command "show flogi internal errors ". please refer the attachment  text file.

 

 

6. Was this working before?

A: Before is working. have ever unplug electrical cable . again poweron the problem is appear.

Wes Austin
Cisco Employee
Cisco Employee

Can you post your boot order and zoning configuration from upstream switch? UCS may not be logging in correctly if zoning is not configured correctly on your SAN switch.

 

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: