UCS Hardware Compatiability for 4x code upgrade

[EricPeppper9003]

Datacenter is upgrading from 3x code to 4x code for all Cisco UCS blade server, 5k and 6200 FI, when this was done from 2x to 3x there were hardware compatibility issues that arose with certain components.  Would anyone happen to know where to find such a list? I am seeking to find a list of compatible hardware for the following hardware:

UCSB-PSU-2500ACDV-AA26870L-A

UCS-PSU-6248UP-AC

N20-C6508

UCSB-5108-AC2

UCS-FI-6248UP

N20-PAC5-2500W

UCSB-PSU-2500ACDV-AA26870L-A

UCS-PSU-6296UP-AC

UCS-FI-6296UP

[Wes Austin · Accepted solution]

Check the release notes for UCSM 4.0, specifically the "Deprecated Hardware" section.

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/CiscoUCSManager-RN-4-0.html

Off quick glance, all the components you listed are supported with 4.0. I would still double check. Typically older blade and rack servers, as well as older VIC adapters, etc are deprecated components.