UCS Management Pack 4.1 SCOM - Connection to IMC server failed
Running SCOM 2012 R2 with the 4.1 UCS management pack, discovered and monitoring the central UCS fine, we have 28 remote IMC's we are trying to monitor, when added in pairs either one of both fail with login error and SCOM stops monitoring them, i have turned up logging to debug and the only error displayed is:
DEBUG : 13 : 2018-02-28 09:33:50 : Entry: UcsImcAgent.PopulateClassDataCache(imcServer = Cisco.UcsService.UcsImc.IMCServerDetails, cacheClasses = System.Collections.Generic.List`1[System.String]) ERROR : 10 : 2018-02-28 09:33:52 : Error in the application. ERROR : 10 : 2018-02-28 09:33:52 : at Cisco.Imc.ImcHandle.Login(String name, String userName, SecureString password, Boolean noSsl, Nullable`1 port, Action`1 dumpXml) at Cisco.UcsService.UcsImc.UcsImcConnector.Connect() at Cisco.UcsService.UcsImc.UcsImcAgent.PopulateClassDataCache(IMCServerDetails imcServer, List`1 cacheClasses) INFO : 10 : 2018-02-28 09:33:52 : UcsImcAgent.PopulateClassDataCache() - connection to IMC server (10.40.21.69) failed. INFO : 10 : 2018-02-28 09:33:52 : UcsImcAgent.PopulateClassDataCache() - disconnecting from : 10.40.21.69 INFO : 13 : 2018-02-28 09:33:56 : UcsImcAgent.PopulateClassDataCache() - connection to IMC server (10.40.21.68) established. INFO : 13 : 2018-02-28 09:33:56 : UcsImcAgent.PopulateClassDataCache() - successfully verified version of IMC server : 10.40.21.68 INFO : 13 : 2018-02-28 09:33:59 : UcsImcAgent.PopulateClassDataCache() - disconnecting from : 10.40.21.68
i have tried different servers with the monitoring service same result, also changed from https to http again same problem.
Was trying to get neworking to work on a new Ubuntu install on a UCS server. I did a "shutdown -r" and rebooted the server. Now it seems to be stuck in the Aptio setup utility. I either choose "save and exit" or exit without saving changes and I am brough...
Just wonder we recently try to add 2 M200 with firmware 4.1.1b, our UCS manager version is 4.0.2d, we got error said cannot donwgrade. I know we can update ucs manager from 4.0 to 4.1, bur wonder we can downgrade
OpenStack Neutron project offers pluggable framework means you can extend the capability of Neutron by orchestrating the Neutron functions to your upstream networking gears. For example, if you have provisioned a VLAN tagged Neutron network in Op...
https://soundcloud.com/user-327105904/s7e25-from-the-office-to-anywhere-empowering-secure-remote-work-with-cisco-vdi-solutions As organizations have had to rapidly respond and transition in the face of swift change, Cisco VDI solutions have enabled ...