ā01-18-2015 04:06 AM - edited ā03-01-2019 11:59 AM
Hi,
Is Cisco UCS B200 M4 supported on UCS mini solution ?
When I check UCS B200 M4 data sheet below it says " The UCS B200 M4 Blade Server mounts in a Cisco UCS 5100 Series blade
server chassis or UCS Mini blade server chassis."
But I can not configure UCSB200 M4 on CCW when I choose UCS mini chassis.
Regards,
Bikash
Solved! Go to Solution.
ā01-20-2015 04:16 AM
Just got the information that it will be supported with 3.0(2) release, expected Q2CY15.
ā01-28-2015 06:50 AM
Hi Walter,
Now I can add UCSB-B420-M4 to UCS mini chassis on CCW. But this is on hold till 29th Feb 2015.
Regards,
Bikash
ā01-18-2015 10:17 AM
Hi Bikash
You are right; technically B200-M4 works, however, the UCS mini web site
doesn't mention it yet as supported. This is why CCW doesn't show it. Someone from Cisco Product Management can help here.
ā01-19-2015 03:16 AM
Hi Walter,
Thank you very much. I am more confused when I see below deployment scenario page 49-51 of below document.
http://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-b-series-blade-servers/spec_sheet_c17-644224.pdf
Regards,
Bikash
ā01-19-2015 04:05 AM
Hi Bikash
I believe this is an issue with the ordering tool CCW; I would just go ahead, and order B200-M4 as spare; technically it is working and supported.
Cheers Walter.
ā01-19-2015 07:06 PM
Hi Walter,
Have you ever tested B200-M4 in UCS Mini Chassis (Cisco UCS 6324 Fabric Interconnect ) ? If yes, then I go ahead and propose to my customers.
Regards,
Bikash
ā01-19-2015 11:15 PM
Hi Bikash
No I didn't ! the available Firmware 3.0d doesn't support it yet
It's not yet in the Support matrix
http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html
nor release notes
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/ucs_3_0_rn.html
First Published: July 23, 2014
Last Updated: December 4, 2014
Cheers Walter
ā01-20-2015 04:16 AM
Just got the information that it will be supported with 3.0(2) release, expected Q2CY15.
ā01-28-2015 06:50 AM
Hi Walter,
Now I can add UCSB-B420-M4 to UCS mini chassis on CCW. But this is on hold till 29th Feb 2015.
Regards,
Bikash
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: