UCS MINI VHBA WWN cannot display from SAN switch

[wangyang]

Hi,all:

 introduce hardware environment:

  UCS MINI 、 FI6324 、B200M3

 description the problem:

 when finish associate profile,  login to SAN switch, the VHBA adapter WWN  cannot appear .and login to FI6324,

 following output of  the command show interface brief ,

 -------------------------------------------------------------------------------
Interface  Vsan   Admin  Admin   Status      Bind                 Oper    Oper
                  Mode   Trunk               Info                 Mode    Speed
                         Mode                                            (Gbps)
-------------------------------------------------------------------------------
vfc3442    101    F     on     npmExtLinkD Veth11634                --
vfc3443    102    F     on     errDisabled Veth11635                --

-------------------------------------------------------------------------------

so what's wrong for the B200M3 ?

also refer attach picture

[Kirk J]

Greetings.

Probably has more to do with the state of your upstream FC switch than your blade.

Please post the output from the following commands via NXOS on both FIs:

#show npv flogi-table

#show vsan 101

#show vsan 102

#show int fc x/y   (where x/y is your FC uplinks)

Thanks,

Kirk...