Join Cisco Technical Marketing Engineers and other data center management experts for a discussion on UCS Central update for the 1.1(2) Release. You will learn more about the features, and how to implement and deploy on them.
When: March 11th, 2014 8:00-9:00am PST
Eric Williams , Technical Marketing Engineer, Cisco
Jeff Silberman ,Technical Marketing Engineer, Cisco
Jacob van Ewyk, Product Manager, Cisco
Roger Andersson, Technical Marketing Engineer, Cisco
All I am looking for documentation around methods to move an existing Fabric Interconnect Uplink in a VxBlock from it present Nexus 5K switches to a new set of 93180YC switches I have two 5596 Switch in the standard VxBlock pairing with the rela...
Greetings All! Did someone had experience with installing Nvidia Tesla P6 cards (USCB-GPU-P6-R) to M4-generation servers? I know that officially it is supported only on UCS B200 M5 server, but B200 M4 has the same Rear Mezzanine slot, so...
We have Fabric A and fabric b each FI has 4 x 8 Gbps (8 total) - these are NOT connected via Port-channel We have concerns that these links may becoming saturated. How can i verify this from UCS manger? is it do-able or do...
Newbie post but I'm getting conflicting advice and would appreciate some thoughts. We have a UCS environment currently running 2.2(8L) and wish to upgrade to 3.X or 4.X to allow us to purchase and add some M5 blades in preparation for a vSphere upgra...
Running UCS 6232 16UP fabric Interconnects with firmware 4.0.2dConnecting a UCS C220 M5SX server with a VIC 1385 card in PCIe slot 1. Direct Attach.Making a policy for the server and attach it.Before attaching the server to FI, I had VMware ESXi 6.7 u2 in...