Join Cisco Technical Marketing Engineers and other data center management experts for a discussion on the features and capabilities of the Cisco Integrated Management Controller v2.0. This new software release is available on our C22 M3, C24 M3, C220 M3 and C240 M3 platform and introduces new innovative capabilities which will enable Cisco Server administrators to be more efficient. We will also have a special guest share a publicly available Python Library that he designed to interact with C-Series servers and exploit capabilities associated with CIMC 2.0.
When: Tuesday, June 17, 2014 from 8-9AM PST
Moderator: Eric Williams , Technical Marketing Engineer, Cisco
Guests: Jeff Foster, Technical Marketing Engineer, Cisco Rob Horner, Consulting Systems Engineer, Cisco
Running UCS 6232 16UP fabric Interconnects with firmware 4.0.2dConnecting a UCS C220 M5SX server with a VIC 1385 card in PCIe slot 1. Direct Attach.Making a policy for the server and attach it.Before attaching the server to FI, I had VMware ESXi 6.7 u2 in...
view more
I have a B200 M4 with a UCSB-VIC-M83-8P that lost its connections all of a sudden. I reacknowledged the blade and all looks good now, but I'm trying to figure out what happened. What kind of action would cause this? I don't expect anyone...
view more
Hi,I've got C220-M4 server located far away in data center. The problem is that I became server owner, however previous owner could not provide credentials to CIMC. So, I've got CIMC IP address but I cannot log-in.Is there any way to reset CIMC passw...
view more
We have cisco UCSC-C220-M4S server running ESXi 5.5U3,now we are going to upgrade Firmware 4.0(2h) , followed by ESXi 6.5 U2 upgrade using below cisco customized image VMware_ESXi_6.5.0_10719125_Custom_Cisco_6.5.2.3_Bundle.zipRelease Date: 2019...
view more
When will the Cisco Custom ISO for ESXi 6.7 U3 Install CD be ready? I've looked on VMware's site and it's not available. Vmware told me to ask Cisco and Cisco told me to ask VMware. I'm going in circles.
